Home
>> Tutorials
>> Best Way to Remove A Chip For Reballing
>> Add a new Tutorial
>> Edit Tutorial
The Extreme Hybrid Kits are out and price drops!
Can be ordered from our store now, the extreme is a major update of the hybrid fix and drops core temps by about 6C.
Click here for more information and pics!
XBOX 360 SPI JTAG USB Flasher (compatible w/psgroove)
& Lite-On iHAS 124B LT MAX DVD Burner
Best Way to Remove A Chip For Reballing
Clicks: 9353
Author: halo3
| Error codes that can be fixed with this method: | ||
|---|---|---|
| Primary | Secondary Error code | |
 1RLOD |
| |
 2RLOD | ||
 3RLOD | ||
 4RLOD | YES | |
Ok so instead of using a vacume pen to remove a chip where if you move it the smallest bit your screwed and it is almost imposible to get it right. So instead I found it is far better to use a vacume, because it gives a perfect lift and is easy to do. To do this you only need a vacume, and some sort of adapter to pick the chip up and not suck it up. So besides that you basicly do it the same way you would with getting a chip off with the vacume pen; you heat up the chip to about 325C or so, then heat it like that for about 30-40 seconds, then quicky move the heatgun so you can get at the chip with the vacume, then quickly grab the vacume, put it right over the chip and suck it up; I mean get it on the adapter you have, because you don't want to dig through your vacume for the chip XD.
Pic of my vacume(im sure any vacume would work):
Pic of the adapter for the vacume:
Pics of the results:
Notice: The Tutorials have been done many times and were often successfull, however we cannot guarantee the success and so dont take any responsibility for any damages that might be caused by it, you do it on your own risk!!!
