>> Home
>> Tutorials
>> Cut the CPU temp trace
>> Add a new Tutorial
>> Edit Tutorial
Xbox 360 USB NAND Flashers!
You want to do the JTAG hack, but your computer lacks an LPT port or it just did not work for you.
Say no more! Feast your eyes on the USB SPI NAND Flasher.
Click here to buy one!
Cut the CPU temp trace
Friday 21st of November 2008Clicks: 25571
Author: Wilhelm
| Error codes that can be fixed with this method: | ||
|---|---|---|
| Primary | Secondary Error code | Vote for us! |
 1RLOD | ||
 2RLOD | 0011; | |
 3RLOD | ||
 4RLOD | ||
Cutting the CPU temperature trace is the last resort to get rid of error 0011 (CPU overheating). In 99% of cases this error is caused by an improper application of thermal compound or an incorrect number of washers.
Only in a very few cases is a faulty temperature sensor causing the error, so double-check everything else before you do this procedure.
Be very careful whilst cutting the trace, if you cut in too deep this will damage other traces. If you slip this might damage other parts easily as well.
Materials:
- disassembled 360 mainboard (heatsinks must be removed)
- A knife or a scalpel
All you have to do is cut this trace like on this picture, the black stripe symbolizes where you have to cut it.
(The black stripe is in the lower left corner of the picture)
After that apply thermal compound, etc.
Special thanks for this discovery go to RDC from xbox-scene, he originally figured this out.
notice: The Tutorials have been done many times and were often successfull, however we cannot guarantee the success and so dont take any responsibility for any damages that might be caused by it, you do it on your own risk!!!
