Details for Error code -/-

No Audio or no Video or both



0 red lights

 
Details
Primary Error code:0 red lights 0 RLOD
E-Code / Secondary Error code:- (No Audio/Video) / -
Binary/Hex:00000000 / 0x00 -> 0
Known fixes:

1) X-Clamp replacement - tighten the screws on the side facing the HANA chip slightly more
2) Reflow GPU and HANA chip

Related Errors:
Powered by Xbox-experts.com 
E74
Description:

This error is caused by a cold solder joint in the GPU - HANA chip area, like E74.The 360 doesnt recognize it yet though.

References:
No References available!
Clicks:35873
Share(BBCode):

 
 

Comments for this Error code:

occhialidasoleoakleyjuliet on 2015-04-09 13:03:53 :

my xbox show me only green dot in middle. eject button works. i can turn my xbox
with my wireless controller but it does not sync.
there is no video or audio feed . my tv shows me no signal.
will this work for me..

 

occhialidasoleoakleyjuliet on 2015-04-09 12:59:43 :

my xbox show me only green dot in middle. eject button works. i can turn my xbox
with my wireless controller but it does not sync.
there is no video or audio feed . my tv shows me no signal.
will this work for me..

 

max1zzz on 2013-04-21 00:26:53 :

had a falcon with this recently, reflowed the gpu and it is working fine

 

Ruano_Roxo on 2013-03-07 03:19:36 :

I have done two consoles with this error today, both falcons.

1st would boot normally, you could see the green ring of lights being lit, but
no video or audio with HDMI/Component/Composite/VGA.

2nd would not boot, the middle led was green all the time and didnt give any red
lights.

Fixed both with a REBALL on the HANA chip using a Honton HT-R490 :D

 

kingdarius on 2013-01-01 09:35:17 :

console had 0020, I reflowed using flux but before i did, I flushed the chip out
with alcohol. RROD fixed but now no video. gonna try reflow the GPU again but
cant seem to find the hana (console without HDMI) or its either the one that
doesnt have solder balls... not too sure. I'll post my solution.

 

kingdarius on 2012-06-16 06:15:32 :

fixed it once with a re-flow and re-assembled the console. put the x-clamps back
on and after a month no AV output again. Did a re-flow again and did a x-clamp
mod by replacing standoffs with bolts and washers. hopeful will not occur again.

 

electonerd on 2012-04-11 07:16:35 :

xbox-experts.com/tutorial/wilhelm-s-improved-x-clamp-fix/

This really works! I just did it!

 

Elite360Repairs on 2010-07-29 00:32:26 :

Just came across my first No Video issue since having my Aoyue 968. Tried
X-Clamping the CPU / GPU and had no luck. Next I reflowed the HANA chip and it
works perfectly.

 

NickdogV on 2010-06-09 05:42:49 :

About 1 out of 10 of the repairs I get has this No Video issue. I reflow the
GPU with Aoyue and replace the x-clamps and I have about a 95% success rate with
these and only 1%-2% of these come back within the 3 Month warranty that I
offer.

 

Add a new comment:

Remaining characters:

Anti-spam: Captcha



Copyright Information: Lately it has come to our attention that more and more people stole content from this Error code Database without giving credit, some also restricted access to this information and demanded a payment, we would like to point out that it is perfectly fine to republish content from XE on other sites, however we demand a link back to this error code database and the information must be freely and non commercially available, we appeal to those who feel addressed, add a link and respect the work of others, thank you...

Notice: None of this is official, the methods have often been proven to work but success cannot be guaranteed, you do it on your own risk!
If your console is still covered by the 3 year warranty use it because Microsoft will fix it for free!
A lot of the information you are getting here has been collected in the community, so thanks to everybody who shared his misery!




Back
 
 
 

 
 
 

Xbox Repair Guide

Please select the number of (red) lights that your ring of light shows:

0 red lights
0
 
1 red light
1
 
2 red lights
2
 
3 red lights

4 red lights
4
 


or

Error codes

Go straight to the Error code list/ Database!