Details for Error code E03/0003

Power problem/ Cold solder joint under CPU



3 red lights

 
Details
Primary Error code:3 red lights 3 RLOD
E-Code / Secondary Error code:E03 (No Audio/Video) / 0003
Binary/Hex:00000011 / 0x03 -> 3
Known fixes:

1) Scan the mainboard and make sure that there is nothing that might short something out, like metal chipping, components, that moved out of place while reflowing, etc. - Especially in the CPU area
2) Replace MOSFETs and regulators that are known to cause it if they were blown
3) Check if the standby voltages are existent, if they are not at a certain area replace the parts in the area which are likely to be defective.
4) Reflow the CPU
5) X-Clamp replacement

Related Errors:
Powered by Xbox-experts.com 
0001
Description:

The CPU is somehow not getting clean power, can be a cold solder joint under it or one of the external parts like a missing cap etc.

References:

http://forums.xbox-scene.com/index.php?showtopic=484726

Clicks:118918
Share(BBCode):

 
 

Comments for this Error code:

proconsoles on 2015-05-19 14:53:27 :

Got a Xbox 360 (falcon mobo) with E74 error, which already has been reflowed a
couple of times. So I suggested customer a reball.

Reballed GPU, after that got a 3RROD with 0003 , fan not working and the short
buzzing sound.

Soldered back on a new preballed GPU and everything was working again :-)

 

occhialidasoleoakleyjuliet on 2015-04-20 23:47:54 :

in xbox slim have nand of other console, example xbox slim trinity with nand of
jasper

 

Riz1234 on 2013-10-16 18:14:41 :

Can some 1 tell me what is that black square box with 4 pin next to infrared
beside enject button

 

Riz1234 on 2013-10-16 18:09:37 :

ok guys, fist i press on button then it goes off,the i reflow GPU and cpu it the
same.
i ready most of the comment and cut off Q6F1 s pin of the mosfet and it able to
powerup by showing error code 0031.

I reflow CPU and GPU, nothing happen, i reflow HANA chip and solder back the Q6F
s pin and it able to powerup by showing error code, not like before it wont show
anycode just back off again.

I reflow GPU and now i get 0003 and there a buzz sound near the CPU or some ware
around.

What WTF did i do wrong. Pls help me out here.

 

bloke101 on 2013-07-31 08:46:27 :

This is definitely the GPU. I took I started hammering a nail into the gpu until
pretty blue glass started going everywhere. It'd still try to boot
however, the center of the GPU would literally start to glow amber...

After I did the top part of the GPU (the little square) I got 0003.

 

chrismwarren on 2013-05-14 00:43:53 :

Got this (0002) and secondary 0003 on an old school Elite box that had been
previously brought back from an e74/1022 with a uni-clamp. This appeared after
CPU and GPU reflows.

The guy who reflowed it had cranked the hardware down pretty tight. I backed off
the screws a quarter turn at a time and tested it. My 0003 with a buzz, went to
just an 0003 then to 0002, then finally worked.

Tightened up individual screws a quarter turn and found that the two CPU screws
closer to the memory ports were the culprits. Too much and it threw 0002.

Tested streaming video for two hours after, worked great. Rebooted next day
again with no issues.

 

max1zzz on 2013-01-13 18:05:13 :

if you get a buzz from one of the coils with error code 0003 it is a defo dead
gpu, just had a console with those symptoms, replaced the gpu and it's
good as gold

 

Pseudo99 on 2012-10-05 08:56:24 :

Nevermind on my solution, I spoke too soon :)

 

Pseudo99 on 2012-10-05 08:33:44 :

For me, I had done some accidental 15574/14719 dashboard mixing on a falcon
JTAG. Went back to a clean 15574 with proper cpukey, and all was well again.

 

antman1158 on 2012-08-18 08:52:17 :

0003 isn't a CPU problem. It's related to the GPU's connection
to the motherboard. GPU' is usually damaged and needs a replacement.

 

Kevin26 on 2012-05-19 23:40:51 :

Had one like this removed the gpu and now i no longer have a power problem so it
might need a gpu replacement.

 

Outdoorguy236 on 2012-04-29 23:57:26 :

I had a working unit and after cleaning it and decided to do the heatsink mod.
Upon power up I got the OOO3 error, loosened up the GPU heat sink and the unit
began working. So it’s not always the CPU. It would be nice to know how
much torque to put on the heatsink mod screws.

 

PRiME on 2011-09-14 08:30:18 :

Reballed GPU fixed my 0003 error. But clearly if that does not work then A) Its
a broken GPU B) Its a broken MOSFET, or some power regulator to GPU (such as
u8n1). PS. Some people need to learn how-to write English correctly ;)

 

hellrazor006 on 2011-08-17 18:55:21 :

Here you can enterso is this error a gpu issue then and not a cpu error?? also
by popcorned does this mean when there is like air bubbles on the gpu?? your
comment...

 

hellrazor006 on 2011-08-17 18:54:38 :

so is this error a gpu issue then and not a cpu error?? also by popcorned does
this mean when there is like air bubbles on the gpu??

 

hellrazor006 on 2011-08-17 18:53:31 :

so is this error a gpu issue then and not a cpu error?? also by popcorned does
this mean when there is like air bubbles on the gpu??

 

Colorado880 on 2011-07-08 23:37:57 :

Got this after attempting a SB reflow for the first time.

 

SinisterCrumb on 2011-06-01 11:12:18 :

This is weird I have 234 light up instead of 134. error code 0003 Im not sure
what its calle but it is a black cylinder with a copper coil wrapped around it.
It is the closest one to where the fan goes. as soon as i hit the power button a
buzz comes from that and i get a light pattern like this .:

 

SinisterCrumb on 2011-06-01 11:11:42 :

Here you can enter your comment...

 

stephentravis666 on 2011-05-30 00:34:15 :

0003 Can also be a cause of missing suface mount components!

 

seve91 on 2011-03-04 20:19:25 :

0003 means gpu burnt or popcorned...nothing to do! If you want to be sure, just
desolder the GPU, clean it, and verify the resistance: should be 0.5 ohm (like
0) if it is burnt, or around 2 ohm if it is good.
If it is burnt the only think you can do is buy a new reballed gpu or take it
from another board and reball it yourself!

 

bigart666 on 2011-02-24 07:40:29 :

0003 yup to much heat kills gpu

 

azazel on 2011-01-15 06:46:19 :

didnt mean to post twice sorry i didnt see the first post on here.

 

azazel on 2011-01-15 06:45:37 :

reflowed with no clean flux now ive got 0003 should I reflow the cpu first or
test the mosfets first? any suggestions would be appreciated. thanks in advance

 

azazel on 2011-01-15 06:43:37 :

just did the heatgun with insulation fix plus no clean liquid flux for e74 and
now i have 0003. Should i first try reflowing the CPU? or should I test the
MOSFET"S first? Any Suggestions would be greatly appreciated. thank you.

 

dmcbudman on 2010-07-27 05:35:10 :

i can confirm that 0003 on a falcon is a gpu problem.
same as solidwars e74
while reflowing to fix the e74 one of the balls popped out from under the gpu(i
know...its the first time i ever saw that happen)

 

solidwars on 2010-05-21 20:17:27 :

I had this same problem after heat gun reflow on E74 error it gave me 3 RROD
secondary code 0003. I tried loosening the CPU heatsink it made no difference
then i tried the GPU heatsink and it started up. It was working but i wasnt
happy with looseness of the heatsink against mobo so decided to try nylon
washers (slightly thicker) with metal ones on top. No idea how long it will last
but working for 3 days proper use so far.

 

nzlab on 2010-05-16 19:56:48 :

Some of the boards that I've experimented with, 0003 occurred after i
killed the GPU.

 

Add a new comment:

Remaining characters:

Anti-spam: Captcha



Copyright Information: Lately it has come to our attention that more and more people stole content from this Error code Database without giving credit, some also restricted access to this information and demanded a payment, we would like to point out that it is perfectly fine to republish content from XE on other sites, however we demand a link back to this error code database and the information must be freely and non commercially available, we appeal to those who feel addressed, add a link and respect the work of others, thank you...

Notice: None of this is official, the methods have often been proven to work but success cannot be guaranteed, you do it on your own risk!
If your console is still covered by the 3 year warranty use it because Microsoft will fix it for free!
A lot of the information you are getting here has been collected in the community, so thanks to everybody who shared his misery!




Back
 
 
 

 
 
 

Xbox Repair Guide

Please select the number of (red) lights that your ring of light shows:

0 red lights
0
 
1 red light
1
 
2 red lights
2
 
3 red lights

4 red lights
4
 


or

Error codes

Go straight to the Error code list/ Database!