Details for Error code E07/0013
Cold joint under RAM/ RAM overheating
|Primary Error code:||2 RLOD|
|E-Code / Secondary Error code:||E07 (No Audio/Video) / 0013|
|Binary/Hex:||00000111 / 0x07 -> 7|
1) Putting the faulty RAM brick under pressure with a 3mm thick craft foam pad.
Powered by Xbox-experts.com
|No Related Errors available!|
In 99% of the cases it is a cold solder joint under one of the RAM bricks though.
Comments for this Error code:
occhialidasoleoakleyjuliet on 2016-10-03 06:17:04 :
Good evening, I have a xbox 360 and presents the diguiente problem: the power
source illuminates orange when I turn on the console is changed to green and
Immediately returns to orange, the console 3 red lights and the code shown
appears is the (0013 ) as I can repair my console from my house ??
skylinenismo on 2013-02-12 09:06:46 :
This just may be me but 0013 and 0031 seem to be the same problem just throws a
different code... I ended up having a 0013 and i had to re-solder
"C4F3" by the top ram chip that sits outsite the gpu heat plate. Let
me tell you what a pain! After wards it needed a proper reflow and it's
all Green lights now for the past 4 hrs. I'll post back if it breaks, when
it breaks, and what code it ends up throwing next.
clart on 2012-09-24 07:08:59 :
Please help! I have the same error code (0013) but with 3 red lights. Power
brick led is orange.
brodethedarkness on 2012-07-31 07:42:25 :
My xbox has this code but three red rings. Someone help please
BIGFROMBEHIND08 on 2012-03-12 15:58:00 :
I fixed the problem with an xclamp fix.
It isnt overheated but the fan goes crazy the second it starts up.
Any idea how to fix that?
JaiyeDZ on 2011-11-11 23:59:05 :
Ok well I have this problem and on mine I dont think it is a cold joint under
the ram or the HANA chip because I can play it for about an hour and a half
before it shuts off and the lights will show. It has been x-clamp fixed, 12 volt
fan modded, and penny tricked and all its done has extended the use time, but it
still gets this error. I have already added pennies to the top ram bricks too,
but get same results. I was thinking about taking the electric tape off the
pennies to expose the copper and also applying thermal paste to the top penny so
hopefully all heat will go to the top penny. I'll post my results.
CasualGamerCC on 2011-10-21 06:35:32 :
Successfully repaired by reflowing all 4 ram chips on the top side with flux on
a ZT-7 using the standard profile reaching max 230C on the temp indicator.
texasproxmodsxe on 2010-09-09 21:57:46 :
yes reflowing the ram will take care of problem also adding washers to the top
focusthis51 on 2010-08-19 22:49:09 :
stacking two 1mm aluminum plates cut to the size of the ram, on top of the ram
under the heatsink will fix this problem
vmanisme on 2010-02-14 03:14:33 :
Here you can enter your comment...
Copyright Information: Lately it has come to our attention that more and more people stole content from this Error code Database without giving credit, some also restricted access to this information and demanded a payment, we would like to point out that it is perfectly fine to republish content from XE on other sites, however we demand a link back to this error code database and the information must be freely and non commercially available, we appeal to those who feel addressed, add a link and respect the work of others, thank you...
Notice: None of this is official, the methods have often been proven to work but success cannot be guaranteed, you do it on your own risk!
If your console is still covered by the 3 year warranty use it because Microsoft will fix it for free!
A lot of the information you are getting here has been collected in the community, so thanks to everybody who shared his misery!