Details for Error code E19/0103

Cold solderjoint- GPU/ bad cap



3 red lights

 
Details
Primary Error code:3 red lights 3 RLOD
E-Code / Secondary Error code:E19 (No Audio/Video) / 0103
Binary/Hex:00010011 / 0x13 -> 19
Known fixes:

1) Remove short circuit from bridged capacitor under the GPU
2) X-Clamp replacement
3) Reflow CPU/GPU/RAM

Related Errors:
Powered by Xbox-experts.com 
0102
Description:

This error can either be caused by a cold solder joint under the GPU or a bridged capacitor under it(power problem)

References:
No References available!
Clicks:91927
Share(BBCode):

 
 

Comments for this Error code:

kingdarius on 2015-03-26 07:59:59 :

Got it to work on the first Reflow. I reflowed the GPU, RAM and HANA chip,
worked like a charm. used the high heat on the heat gun and also used water
soluble F130 liquid solder flux under the GPU/RAM/HANA chips before heating.

 

equisch3x on 2014-02-24 17:58:37 :

fixed this by reflowing the GPU.

 

ultimate360 on 2013-08-04 09:11:58 :

Can confirm that this can be caused by bridged solder balls under GPU. I just
repaired a zephyr by reballing the GPU.

 

go_ninja84 on 2012-01-07 23:17:17 :

i have this error code 0103 i tried reflowing the board and still 0103 i then
inspected the board could not find any traces of solder causing a short circuit
could it be there is a solder ball that has connected with another under the
gpu/cpu/RAM?

 

go_ninja84 on 2012-01-07 20:59:55 :

i have this error code 0103 i tried reflowing the board and still 0103 i then
inspected the board could not find any traces of solder causing a short circuit
could it be there is a solder ball that has connected with another under the
gpu/cpu/RAM?

 

tfi1969 on 2011-12-22 01:30:40 :

I have a old zephyr got it 6 months ago with 1st rrod, reflowed with heatgun and
it was fine 2 days ago it e74'd reflowed it again and now it just
0103's on me, done a successful oven re-flow heavily insulated but no
difference still 0103. any idea's on whats causing it as an oven reflow
would surely have taken care of a cold solder joint.

 

goodolick on 2011-08-05 20:22:13 :

Can be a lifted pad. Had one I tried two chips on this board before I noticed
the lifted pad on the outer perimeter.

 

xbox-jedi on 2011-05-27 19:05:41 :

Seems to be solder problem (like most red lights)

We reflow dozens of xboxs a month here, and like the others we did our process
and anti-x-xlamp rebuild,
and BAM it works like a champ!

 

killersla on 2010-10-15 13:02:20 :

i got this error done xclamp with gpu reflow didnt work at first then loosened
gpu screws and now works fine

 

Add a new comment:

Remaining characters:

Anti-spam: Captcha



Copyright Information: Lately it has come to our attention that more and more people stole content from this Error code Database without giving credit, some also restricted access to this information and demanded a payment, we would like to point out that it is perfectly fine to republish content from XE on other sites, however we demand a link back to this error code database and the information must be freely and non commercially available, we appeal to those who feel addressed, add a link and respect the work of others, thank you...

Notice: None of this is official, the methods have often been proven to work but success cannot be guaranteed, you do it on your own risk!
If your console is still covered by the 3 year warranty use it because Microsoft will fix it for free!
A lot of the information you are getting here has been collected in the community, so thanks to everybody who shared his misery!




Back
 
 
 

 
 
 

Xbox Repair Guide

Please select the number of (red) lights that your ring of light shows:

0 red lights
0
 
1 red light
1
 
2 red lights
2
 
3 red lights

4 red lights
4
 


or

Error codes

Go straight to the Error code list/ Database!