Details for Error code E79/1033

Broken Harddrive(Xam.xex)



1 red lights

 
Details
Primary Error code:1 red lights 1 RLOD
E-Code / Secondary Error code:E79 / 1033
Binary/Hex:01001111 / 0x4F -> 79
Known fixes:

1) Replace your harddrive.
2) If you know it isnt the harddrive try the Southbridge X-Clamp Fix or Reflow the Southbridge
3) Check JTAG wiring! Especially the diodes they MUST face the correct direction - Away from J2D2.

Related Errors:
Powered by Xbox-experts.com 
No Related Errors available!
Description:

This error occurs when your harddrive is defective, it might still work sometimes....
There is also a small chance that it is a cold joint under the Southbridge causing problems with the I/O of the HDD.
It can also be related to wiring the diodes while JTAGGING.
Couldn't start xam.xex

References:

TheConsoleMedic - JTAG wiring

Clicks:78848
Share(BBCode):

 
 

Comments for this Error code:

kyledgrant on 2011-08-16 19:44:03 :

i have fixed a few with a gpu reball. Just another thing to try

 

garyfez on 2011-01-15 18:58:31 :

I get the e79 error before after i did the jtag my xbox used to work but would
turn itself off after so long but now all i get is e79 error could it be my
solder points or is the console fried?

 

esqueue on 2010-11-07 20:24:40 :

I had this e79 1033 error code after I did some soldering to my jtag wires. The
error would go away after reflashing back to the stock nand fw. removed all my
jtag wires and tested the points with alternate points listed onlne. Turns out
that one of my jtag points were bad so I scraped away a little of the trace near
the soldering hole and the solder now touches the trace. still looks stock.

 

yazza2010 on 2010-09-25 07:49:07 :

this can be caused by cut traces, so make sure to check for those!

 

Mistawes on 2010-05-15 10:50:15 :

I was plagued with E79/E71 errors (2nd - 1033), after using your Southbridge
clamp, then the Hybrid Advanced kit. It crashed much slower then (lasted longer
- used to crash on Boot). I did the 12v mod to the GPU fan and removed some
metal casing behind them to improve their airflow. I then added a fan over the
extension of the GPU heatsink and onto the CPU H/S blowing into the case from
outside. (This was after realising a cold hair dryer kept it running)

I could now use it somewhat, but it still crashed/froze. So I re-did the x-clamp
kit and re-applied the thermal paste, then gave the screws a real good tighten
for good contact.

Now it seems to be working fine!! Had the odd crash, but not often and only for
intensive games.

 

Add a new comment:

Remaining characters:

Anti-spam: Captcha



Copyright Information: Lately it has come to our attention that more and more people stole content from this Error code Database without giving credit, some also restricted access to this information and demanded a payment, we would like to point out that it is perfectly fine to republish content from XE on other sites, however we demand a link back to this error code database and the information must be freely and non commercially available, we appeal to those who feel addressed, add a link and respect the work of others, thank you...

Notice: None of this is official, the methods have often been proven to work but success cannot be guaranteed, you do it on your own risk!
If your console is still covered by the 3 year warranty use it because Microsoft will fix it for free!
A lot of the information you are getting here has been collected in the community, so thanks to everybody who shared his misery!




Back
 
 
 

 
 
 

Xbox Repair Guide

Please select the number of (red) lights that your ring of light shows:

0 red lights
0
 
1 red light
1
 
2 red lights
2
 
3 red lights

4 red lights
4
 


or

Error codes

Go straight to the Error code list/ Database!

 

Twitter