Details for Error code E80/1100

NAND - Wrong LDV Version



1 red lights

 
Details
Primary Error code:1 red lights 1 RLOD
E-Code / Secondary Error code:E80 / 1100
Binary/Hex:01010000 / 0x50 -> 80
Known fixes:

1) Downgrade to the old dashboard, solder the resistor back on and then update your xbox.
2) If you have the CPU Key, get the current NAND Flash image and fix the LDV (Just add 1 up to latest kernel).

Related Errors:
Powered by Xbox-experts.com 
No Related Errors available!
Description:

Wrong LDV version in NAND Flash. You have the new dashboard update but not the resistor R3T6, follow known fixes to see how to resolve the problem.

References:

All information from Herbi3221, thanks a lot.

Clicks:39998
Share(BBCode):

 
 

Comments for this Error code:

max1zzz on 2013-04-06 18:47:27 :

had one of these, the area around r3t6 was compleatley destroyed, u6t1 was gone
and 4 of it's pads where missing. Took the u6t2 chip off another board and
fitted it to this one then repaired 3 trace breaks and it booted ;) (but
unfortunatley it booted to a update loop of dash 13604, and with out knowing the
dvd drive vendor or key there is no getting out of that, and the console
wouldn't glitch [Damn xenons] so i'm gonna be putting a cpu from a
blades dash console on this one ;) )

 

max1zzz on 2013-04-06 18:47:12 :

had one of these, the area around r3t6 was compleatley destroyed, u6t1 was gone
and 4 of it's pads where missing. Took the u6t2 chip off another board and
fitted it to this one then repaired 3 trace breaks and it booted ;) (but
unfortunatley it booted to a update loop of dash 13604, and with out knowing the
dvd drive vendor or key there is no getting out of that, and the console
wouldn't glitch [Damn xenons] so i'm gonna be putting a cpu from a
blades dash console on this one ;) )

 

max1zzz on 2013-04-06 18:46:54 :

had one of these, the area around r3t6 was compleatley destroyed, u6t1 was gone
and 4 of it's pads where missing. Took the u6t2 chip off another board and
fitted it to this one then repaired 3 trace breaks and it booted ;) (but
unfortunatley it booted to a update loop of dash 13604, and with out knowing the
dvd drive vendor or key there is no getting out of that, and the console
wouldn't glitch [Damn xenons] so i'm gonna be putting a cpu from a
blades dash console on this one ;) )

 

flonk on 2012-01-12 18:44:35 :

I found that i have this error because i was knocked out U6T2 while dismantling
X-Clamp. Now i solder it back and i have Update Error...

 

holtvillejm on 2011-10-20 06:17:19 :

seve91 do you have detailed pictures of your work?

 

seve91 on 2011-02-20 15:11:41 :

Just solved the problem.I have removed for a mistake R1T6 instead of R3T6 and
the xbox doesn't boot up at all. If i press power button nothing happens.
So I've resoldered R1T6 and desoldered R3T6 for avoid efuses blowing.
The xbox boot up correctly, but when I've done an update it gaves me 1
RROD E80 1100.
So I've dissassembly again the console and replaced R3T6 again.
Unfortunatly I didn't have it anymore, so I've just soldered a 10K
resistor 1/4 watt using two little awg30 wires. Now the xbox boot up again and
it is finishing the update :)

 

gdwrnch29 on 2010-03-31 15:16:45 :

Just curious as to why people always comment on what they're going to do,
but never come back and post a comment as to whether it worked or not? Without
that, these comments aren't much help.

 

gdwrnch29 on 2010-03-31 15:06:28 :

Just curious as to why people always comment on what they're going to do,
but never come back and post a comment as to whether it worked or not? Without
that, these comments aren't much help.

 

ianleblanc on 2009-11-17 17:59:50 :

wow... CR6T1 (right beside R6T3) is sodered on wrong - almost sideways and looks
like a lifted lead... this is probably whats causing my error.

I am going to resoder and see if E80 / sometimes 3 RROD go away

(Microsoft needs to fire some tech and get people in that can soder properly.)

 

ianleblanc on 2009-11-17 16:50:01 :

I got this error on an unmodded xbox. The box has been sent to microsoft once
for RROD fix. This time I got it after doing the xclamp fix.

Going to disassemble and check the R3T6 resistor and possibly resoder if it
looks to have a cold soder joint.

 

Add a new comment:

Remaining characters:

Anti-spam: Captcha



Copyright Information: Lately it has come to our attention that more and more people stole content from this Error code Database without giving credit, some also restricted access to this information and demanded a payment, we would like to point out that it is perfectly fine to republish content from XE on other sites, however we demand a link back to this error code database and the information must be freely and non commercially available, we appeal to those who feel addressed, add a link and respect the work of others, thank you...

Notice: None of this is official, the methods have often been proven to work but success cannot be guaranteed, you do it on your own risk!
If your console is still covered by the 3 year warranty use it because Microsoft will fix it for free!
A lot of the information you are getting here has been collected in the community, so thanks to everybody who shared his misery!




Back
 
 
 

 
 
 

Xbox Repair Guide

Please select the number of (red) lights that your ring of light shows:

0 red lights
0
 
1 red light
1
 
2 red lights
2
 
3 red lights

4 red lights
4
 


or

Error codes

Go straight to the Error code list/ Database!